Ceiling Fans – Installing Low Cost Air Conditioning
Ceiling fans are a simple home improvement project. They may make your house look better and more comfortable. Do you have a ceiling light in your bedroom? It may not be too difficult to replace it with a ceiling fan. These are tips to make it easier.
Be certain that you kill power from the breaker box, not just the switch. There may still be electricity running to your ceiling box. You do not want to get shocked.
Removing the old light is simple. Next task is to wire the fan. Sometimes you can hook them to your ceiling box as you wire them. If not, you may need help. Be sure that you follow the instructions that come with the fan. Next, take the cover off the wall switch. Are there two black wires going to it? There may be one black and one white. If you have two black wires, it is easy. Power runs from the switch to your light. One black and one white is a bit more complex. Power runs from the ceiling to your switch. It then returns to your light in a loop circuit. You will need to hook these up differently.
Black wire installation
There will be four fan wires. Wire the black and blue fan wires together. Attach them to your black ceiling wire. White goes to white. The green fan wire goes to the bare ground wire. This hookup is easy, but it has drawbacks. When you turn the light off, the fan will also be off.
One white and one black
When you wire from a loop circuit you must be careful. Do not attempt this if you are not familiar with electricity. When you wire up your fan, you can control the light and fan separately. There will be two black and two white ceiling wires. Make sure you know which goes to the switch and which stay hot. You will need to check them with a tester. Attach the black fan wire to the black ceiling wire.
Hook your white fan wire to the white power wire. The white switch wire will go to the blue fan wire. The black switch wire will go to the black power wire. Attach the green fan wire to the bare ground wire. This will complete the loop circuit. You can test this to be sure. With power on, carefully turn the wall switch on. There should be full voltage between the blue fan wire and the white power wire. Power should drop to zero, when the wall switch is off. Do not attempt this is you have little electrical knowledge. White and black wires are not normally hooked together. In a few instances, this is allowed.
Finish the installation. Install all ceiling fan blades. Install the new light kit. Check to make sure everything works.
In closing
Installing a new ceiling fan is not difficult. The most important part is wiring it properly. Get assistance if you are unsure of the proper procedure. Hire a professional if you need to. A home improvement project like this can be done in a few hours.
Learn more about skip hire manchester. Stop by the Skip Hire Experts where you can find out all about skip hire prices and what it can do for you.
No related posts.